ZyXEL Communications VSG-1200 V2 User Manual Download Page 116

Page: 116 / 282

VSG-1200 V2 User’s Guide

Chapter 14 Credit Card

116

H A P T E R

Credit Card

This chapter shows you how to configure secure online credit card service on the VSG.

14.1 Credit Card Overview

Your VSG is integrated with various online secure credit card billing services that allow you to
process credit card transactions via the Internet.

Note:

You must register with a credit card billing service provider before you can
configure the VSG to handle credit card transactions.

14.1.1 How Credit Card Billing Works

The following summarizes the process of a customer paying for a subscriber account with a
credit card.

A customer accesses the subscriber login screen and selects a credit card payment option.

The customer selects a service type and enters the contact and billing information.

Customer billing information is processed real-time via the secure online clearing house.

After the transaction is successful, the VSG provides the username and password
information so the customer can log in for Internet access.

14.1.2 Configuration Steps

Do the following to provide online credit card billing service.

Obtain a payment account from Authorize.net, iValidate or WorldPay.

In the

Authentication

screen, select

Built-in Authentication

Click

Select option

to display the

Scenario Guide

screen. Select

Scenario C

and select

the

Allow Credit Card Payment

option.

Enter your payment account information in the

Credit Card

screen.

Configure the subscriber credit card information screen (see

Section 15.6 on page 135

for

more information).

Summary of Contents for VSG-1200 V2



























































































































































































































































































Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands

ZyXEL Communications VSG-1200 V2, User Manual

Search results

Summary of Contents for VSG-1200 V2

Reviews:

Brands by name

Popular brands