Chapter 34 User Account
VMG8825-B Series User’s Guide
282
34.2.1 The User Account Add/Edit Screen
Click
Add New Account
or the
Edit
icon of an existing account in the
Maintenance > User Account
to
open the
following
screen.
Figure 168
Maintenance > User Account > Add/Edit
The following table describes the labels on this screen.
Table 134 Maintenance > User Account > Add/Edit
LABEL
DESCRIPTION
Active
This field indicates whether the user account is active or not.
Clear the check box to disable the user account. Select the check box to enable it.
User Name
Enter a new name for the account. This field displays the name of an existing account.
Password
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the VMG.
Verify Password
Type the new password again for confirmation.
Retry Times
Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout
Enter the length of inactive time before the VMG will automatically log the user out of the web
configurator.
Lock Period
Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in
Retry Times
.
Group
Specify whether this user will have
Administrator
or
User
privleges.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.