manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 235 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 235

 Chapter 23 Voice

VMG8825-B Series User’s Guide

235

23.4.1  The SIP Service Provider Add/Edit Screen 

Use this screen to configure a SIP service provider on the VMG. Click the 

Add new provider

 button or an 

Edit

 icon in the 

VoIP > SIP > SIP Service Provider

 to open the following

 

screen. 

Note: Click 

more

 to see all the fields in the screen. You don’t necessarily need to use all these 

fields to set up your account. Click 

less

 to see and configure only the fields needed for 

this feature. 

SIP Proxy Server 
Address

This shows the IP address or domain name of the SIP server.

REGISTER Server 
Address

This shows the IP address or domain name of the SIP register server.

SIP Service 
Domain

This shows the SIP service domain name.

Modify

Click the 

Edit

 icon to configure the SIP service provider.

Click the 

Delete

 icon to delete this SIP service provider from the VMG. 

Table 104   VoIP > SIP > SIP Service Provider (continued)

LABEL

DESCRIPTION

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments