manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 189 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 189

 Chapter 13 IGMP/MLD

VMG8825-B Series User’s Guide

189

Maximum 
Multicast Data 
Sources

Enter a number to limit the number of multicast data sources (1-24) a multicast group is allowed 
to have. 

Note: The setting only works for IGMPv3 and MLDv2.

Maximum 
Multicast Group 
Members

Enter a number to limit the number of multicast members a multicast group can have.

Fast Leave 
Enable

Select this option to set the VMG to remove a port from the multicast tree immediately (without 
sending an IGMP or MLD membership query message) once it receives an IGMP or MLD leave 
message. This is helpful if a user wants to quickly change a TV channel (multicast group change) 
especially for IPTV applications.

LAN to LAN 
(Intra LAN) 
Multicast Enable

Select this to enable LAN to LAN IGMP snooping capability.

Membership 
Join Immediate 
(IPTV)

Select this to have the VMG add a host to a multicast group immediately once the VMG 
receives an IGMP or MLD join message.

Apply

Click 

Apply

 to save your changes back to the VMG.

Cancel

Click 

Cancel

 to exit this screen without saving.

Table 73   Network Setting > IGMP/MLD (continued)

LABEL

DESCRIPTION

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments