Chapter 10 Quality of Service (QoS)
VMG8825-B Series User’s Guide
161
10.7.1 Add/Edit a QoS Policer
Click
Add
New Policer
in the
Policer Setup
screen or the
Edit
icon next to a policer to show the following
screen.
Figure 82
Policer Setup: Add/Edit
The following table describes the labels in this screen.
Name
This field displays the descriptive name of this policer.
Regulated
Classes
This field displays the name of a QoS classifier
Meter Type
This field displays the type of QoS metering algorithm used in this policer.
Rule
These are the rates and burst sizes against which the policer checks the traffic of the member
QoS classes.
Action
This shows the how the policer has the VMG treat different types of traffic belonging to the
policer’s member QoS classes.
Modify
Click the
Edit
icon to edit the policer.
Click the
Delete
icon to delete an existing policer. Note that subsequent rules move up by one
when you take this action.
Table 53 Network Setting > QoS > Policer Setup (continued)
LABEL
DESCRIPTION
Table 54 Policer Setup: Add/Edit
LABEL
DESCRIPTION
Active
Select
Enable
or
Disable
to activate or deactivate the policer.
Name
Enter the descriptive name of this policer.