Chapter 9 Routing
VMG8825-B Series User’s Guide
147
9.4.1 Add/Edit Policy Route
Click
Add New Policy Route
in the
Policy Route
screen or click the
Edit
icon next to a policy. Use this
screen to configure the required information for a policy route.
Figure 72
Policy Route: Add/Edit
The following table describes the labels in this screen.
Source
Interface
This is the interface from which the matched traffic is sent.
WAN Interface
This is the WAN interface through which the traffic is routed.
Modify
Click the
Edit
icon to edit this policy.
Click the
Delete
icon to remove a policy from the VMG. A window displays asking you to confirm
that you want to delete the policy.
Table 43 Network Setting > Routing >Policy Route (continued)
LABEL
DESCRIPTION
Table 44 Policy Route: Add/Edit (Sheet 1 of 2)
LABEL
DESCRIPTION
Active
Select
Enable
or
Disable
to activate or deactivate the policy route.
Route Name
Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces.
Source IP
Address
Enter the source IP address.
Source Subnet
Mask
Enter the source subnet mask address.
Protocol
Select the transport layer protocol (
TCP
or
UDP
).
Source Port
Enter the source port number.
Source MAC
Enter the source MAC address.
Source Interface
(ex: br0 or
LAN1~LAN4)
Type the name of the interface from which the matched traffic is sent.
WAN Interface
Select a WAN interface through which the traffic is sent. You must have the WAN interface(s)
already configured in the
Broadband
screens.