Chapter 7 Wireless
VMG8825-B Series User’s Guide
113
The following table describes the labels on this screen.
Note: You cannot have two or more scheduler rules with overlapping day and time. If this
happens the following conflict message displays showing the scheduler rule with which
there is a conflict. Click
OK
and select a different time or day.
Figure 49
Scheduler Rule: Conflict Message
7.11 Technical Reference
This section discusses wireless LANs in depth. For more information, see
.
7.11.1 Wireless Network Overview
Wireless networks consist of wireless clients, access points and bridges.
• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can connect with numerous
wireless clients and let them access the network.
• A bridge is a radio that relays communications between access points and wireless clients, extending
a network’s range.
Traditionally, a wireless network operates in one of two ways.
Table 28 WLAN Scheduler: Add/Edit
LABEL
DESCRIPTION
Active
Select
Enable
or
Disable
to activate or deactivate the scheduler rule.
SSID
Select the wireless network to which you want to apply this scheduler rule.
Note: By default 2.4G and 5G main SSIDs are the same. If two SSIDs with the
same name display in the drop-down list the first one corresponds to
2.4G and the second one to 5G.
Rule Name
Enter a descriptive name for the scheduler rule.
Day
Select check boxes for the days that you want the selected wireless network to
perform this scheduler rule.
Time of Day Range
Enter the time period on selected day(s), in 24-hour format, during which the rule will
be enforced.
Description
Enter a description for the scheduler rule.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.