Chapter 7 Wireless
VMG8825-B Series User’s Guide
104
Use this screen to view your VMG’s MAC authentication settings and add new MAC authentication
rules. Click
Network Setting > Wireless > MAC Authentication
. The screen appears as shown.
Figure 40
Wireless > MAC Authentication
The following table describes the labels on this screen.
Table 22 Wireless > MAC Authentication
LABEL
DESCRIPTION
General
SSID
Select the SSID for which you want to configure MAC filter settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the
MAC Address
table.
Select
Disable
to turn off MAC filtering.
Select
Deny
to block access to the VMG. MAC addresses not listed will be allowed to access the
VMG.
Select
Allow
to permit access to the VMG. MAC addresses not listed will be denied access to
the VMG.
MAC address List
Add new MAC
address
Click this if you want to add a new MAC address entry to the MAC filter list below.
Enter the MAC addresses of the wireless devices that are allowed or denied access to the VMG
in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
#
This is the index number of the entry.
MAC Address
This is the MAC addresses of the wireless devices that are allowed or denied access to the VMG.
Modify
Click the
Edit
icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the
Delete
icon to delete the entry.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.