manualshive.com logo in svg

ZyXEL Communications VMG5313-B10A, User Manual

Share
Download
ZyXEL Communications VMG5313-B10A User Manual Download Page 189

 Chapter 11 Network Address Translation (NAT)

VMG5313-B10A/-B30A Series User’s Guide

189

Figure 80   

Port Triggering: Add/Edit 

The following table describes the labels in this screen. 

11.5  The DMZ Screen

In addition to the servers for specified services, NAT supports a default server IP address. A default 
server receives packets from ports that are not specified in the 

NAT Port Forwarding Setup

 

screen.

Table 59   

Port Triggering: Configuration Add/Edit

LABEL

DESCRIPTION

Active

Select the check box to enable this rule.

Service Name

Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on). 

WAN Interface

Select a WAN interface for which you want to configure port triggering rules.

Trigger Start 
Port

The trigger port is a port (or a range of ports) that causes (or triggers) the VMG to record 
the IP address of the LAN computer that sent the traffic to a server on the WAN.

Type a port number or the starting port number in a range of port numbers.

Trigger End 
Port 

Type a port number or the ending port number in a range of port numbers.

Trigger Protocol Select the transport layer protocol from 

TCP

, 

UDP

, or 

TCP/UDP

.

Open Start Port The open port is a port (or a range of ports) that a server on the WAN uses when it sends 

out a particular service. The VMG forwards the traffic with this port (or range of ports) to the 
client computer on the LAN that requested the service. 

Type a port number or the starting port number in a range of port numbers.

Open End Port 

Type a port number or the ending port number in a range of port numbers.

Open Protocol

Select the transport layer protocol from 

TCP

, 

UDP

, or 

TCP/UDP

.

OK

Click 

OK

 to save your changes.

Cancel

Click 

Cancel

 to exit this screen without saving.

Summary of Contents for VMG5313-B10A















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands