manualshive.com logo in svg

ZyXEL Communications VMG4325-B10A, User Manual

Share
Download
ZyXEL Communications VMG4325-B10A User Manual Download Page 57

 Chapter 4 Tutorials

VMG4380-B10A / VMG4325-B10A User’s Guide

57

4.10   Using the Media Server Feature

Use the media server feature to play files on a computer or on your television (using DMA-2500).

This section shows you how the media server feature works using the following media clients: 

• Microsoft (MS) Windows Media Player 

Media Server works with Windows Vista and Windows 7. Make sure your computer is able to play 
media files (music, videos and pictures). 

• ZyXEL DMA-2500, a digital media adapter

You need to set up the DMA-2500 to work with your television (TV). Refer to the DMA-2500 Quick 
Start Guide for the correct hardware connections. 

Before you begin, connect the USB storage device containing the media files you want to play to the 
USB port of your Device.

4.10.1  Configuring the Device

Note: The Media Server feature is enabled by default. 

To use your Device as a media server, click Network Setting > Home Networking > Media 
Server.

Tutorial: USB Services > Media Server

Check Enable Media Server and click Apply. This enables DLNA-compliant media clients to play 
the video, music and image files in your USB storage device.

4.10.2  Using Windows Media Player

This section shows you how to play the media files on the USB storage device connected to your 
Device using Windows Media Player. 

Tutorial: Media Server Setup (Using Windows Media Player)

Computer with

ZyXEL Device

USB Storage Device

Windows Media Player

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands