manualshive.com logo in svg

ZyXEL Communications VMG4325-B10A, User Manual

Share
Download
ZyXEL Communications VMG4325-B10A User Manual Download Page 275

VMG4380-B10A / VMG4325-B10A User’s Guide

275

C

H A P T E R

      3 4

Configuration

34.1  Overview

The Configuration screen allows you to backup and restore device configurations. You can also 
reset your device settings back to the factory default.

34.2  The Configuration Screen 

Click Maintenance > Configuration. Information related to factory defaults, backup 
configuration, and restoring configuration appears in this screen, as shown next.

Figure 142   

Maintenance >  Configuration

Backup Configuration 

Backup Configuration allows you to back up (save) the Device’s current configuration to a file on 
your computer. Once your Device is configured and functioning properly, it is highly recommended 
that you back up your configuration file before making configuration changes. The backup 
configuration file will be useful in case you need to return to your previous settings. 

Click Backup to save the Device’s current configuration to your computer.

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands