manualshive.com logo in svg

ZyXEL Communications VMG4325-B10A, User Manual

Share
Download
ZyXEL Communications VMG4325-B10A User Manual Download Page 249

VMG4380-B10A / VMG4325-B10A User’s Guide

249

C

H A P T E R

      2 4

IGMP Status

24.1  Overview

Use the IGMP Status screens to look at IGMP group status and traffic statistics. 

24.2  The IGMP Group Status Screen

Use this screen to look at the current list of multicast groups the Device has joined and which ports 
have joined it. To open this screen, click System Monitor > IGMP Group Status.

Figure 127   

System Monitor > IGMP Group Status

The following table describes the labels in this screen.

Table 99   

System Monitor > IGMP Group Status

LABEL

DESCRIPTION

Interface

This field displays the name of an interface on the Device that belongs to an IGMP multicast 
group. 

Multicast Group This field displays the name of the IGMP multicast group to which the interface belongs. 

Filter Mode 

INCLUDE means that only the IP addresses in the Source List get to receive the multicast 
group’s traffic.

EXCLUDE means that the IP addresses in the Source List are not allowed to receive the 
multicast group’s traffic but other IP addresses can.

Source List

This is the list of IP addresses that are allowed or not allowed to receive the multicast 
group’s traffic depending on the filter mode.

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands