manualshive.com logo in svg

ZyXEL Communications VMG4325-B10A, User Manual

Share
Download
ZyXEL Communications VMG4325-B10A User Manual Download Page 230

Chapter 19 Certificates

VMG4380-B10A / VMG4325-B10A User’s Guide

230

19.3  The Local Certificates Screen

Click Security > Certificates to open the Local Certificates screen. This is the Device’s summary 
list of certificates and certification requests. 

Figure 114   

Security > Certificates > Local Certificates 

The following table describes the labels in this screen. 

Table 86   

Security > Certificates > Local Certificates

LABEL

DESCRIPTION

Private Key is 
protected by a 
password?

Select the checkbox and enter the private key into the text box to store it on the Device. 
The private key should not exceed 63 ASCII characters (not including spaces). 

Browse...

Click this to find the certificate file you want to upload. 

Import Certificate Click this button to save the certificate that you have enrolled from a certification 

authority from your computer to the Device.

Create Certificate 
Request

Click this button to go to the screen where you can have the Device generate a 
certification request.

Current File

This field displays the name used to identify this certificate. It is recommended that you 
give each certificate a unique name. 

Subject

This field displays identifying information about the certificate’s owner, such as CN 
(Common Name), OU (Organizational Unit or department), O (Organization or company) 
and C (Country). It is recommended that each certificate have unique subject 
information. 

Issuer

This field displays identifying information about the certificate’s issuing certification 
authority, such as a common name, organizational unit or department, organization or 
company and country.

Valid From

This field displays the date that the certificate becomes applicable. The text displays in 
red and includes a Not Yet Valid! message if the certificate has not yet become 
applicable.

Valid To

This field displays the date that the certificate expires. The text displays in red and 
includes an Expiring! or Expired! message if the certificate is about to expire or has 
already expired.

Modify Click 

the 

View icon to open a screen with an in-depth list of information about the 

certificate (or certification request).

For a certification request, click Load Signed to import the signed certificate.

Click the Remove icon to delete the certificate (or certification request). You cannot 
delete a certificate that one or more features is configured to use.

Summary of Contents for VMG4325-B10A
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands