manualshive.com logo in svg

ZyXEL Communications VMG4005-B50A, User Manual

Share
Download
ZyXEL Communications VMG4005-B50A User Manual Download Page 17

 Chapter 2 The Web Configurator

VMG4005-B50A/B60A User’s Guide

17

2.2.1.1  Quick Links

The quick links provides some icons on the right hand side.

The icons provide the following functions.

2.2.1.2  Navigation Panel

Use the menu items on the navigation panel to open screens to configure VMG features. The following 
tables describe each menu item.

Table 3   Quick Link Icons

ICON

DESCRIPTION

Wizard

: Click this icon to open screens where you can configure the VMG’s time zone Internet 

access, and wireless settings. See 

Chapter 3 on page 19

 for more information about the 

Wizard

 

screens.

Theme

: Click this icon to select a color that you prefer and apply it to the Web Configurator.

Language

: Select the language you prefer.

Restart

: Click this icon to reboot the VMG without turning the power off.

Logout

: Click this icon to log out of the Web Configurator.

Summary of Contents for VMG4005-B50A























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands