ZyXEL Communications VMG1312-T10C, User Manual

Page: 45 / 238

Chapter 5 WAN Setup
VMG1312-T10C User’s Guide
45
5.3 The More Connections Screen
The Device allows you to configure more than one Internet access connection. To configure
additional Internet access connections click
Network Setting > Broadband > More
Connections . The screen differs by the encapsulation you select. When you use the Broadband >
Internet Connection screen to set up Internet access, you are configuring the first WAN
connection.
Figure 21
Network Setting > Broadband > More Connections
The following table describes the labels in this screen.
Table 5
Network Setting > Broadband > More Connections
LABEL DESCRIPTION
# This is an index number indicating the number of the corresponding connection.
Active This field indicates whether the connection is active or not. This field is read-only.
Node Name This is the name of the Internet connection.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers configured for this WAN connection.
Encapsulation This field indicates the encapsulation method and multiplexing type the Internet
connection uses.
Modify The first (ISP) connection is read-only in this screen. Use the Broadband > Internet
Connection screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an empty
configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your connection list.