ZyXEL Communications VMG1312-T10C, User Manual, Page: 174 / 238

Chapter 17 System Monitor
VMG1312-T10C User’s Guide
182
17.2 The Log Screen
Click System Monitor > Log to open the Log screen. Use the Log screen to see the system logs
for the categories that you select in the upper left drop-down list box.
Figure 124
System Monitor > Log
The following table describes the fields in this screen.
3 Error: There is an error condition on the system.
4 Warning: There is a warning condition on the system.
5 Notice: There is a normal but significant condition on the system.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.
Table 74
Syslog Severity Levels (continued)
CODE SEVERITY
Table 75
System Monitor > Log
LABEL DESCRIPTION
Level Select a severity level from the drop-down list box. This filters search results according
to the severity level you have selected. When you select a severity, the Device searches
through all logs of that severity or higher.
Refresh Click this to renew the log screen.
Clear Logs Click this to delete all the logs.
Export Click this to save a copy of the logs to your computer.
Email Log Now Click this to have the Device send the log to the email server you configured in the Log
Setting screen.
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Level This field displays the severity level of the logs that the device is to send to this syslog
server.
Messages This field states the reason for the log.