ZyXEL Communications VES-1616F-44, User Manual

Page: 263 / 296

VES-1616F/1624F-44 User’s Guide
262 Chapter 34 IEEE 802.1Q Tagged VLAN Commands
34.2.5 Disable GVRP
Syntax:
no vlan1q gvrp
This command turns off GVRP so that the switch does not propagate VLAN information to
other switches.
34.3 Port VLAN Commands
You must configure the switch port VLAN settings in config-interface mode.
34.3.1 Set Port VID
Syntax:
pvid <VID>
where
This command sets the default VLAN ID on the port(s).
The following example sets the default VID to 200 on ports 1 to 5.
34.3.2 Set Acceptable Frame Type
Syntax:
frame-type <all|tagged>
where
This command sets the specified port to accept all Ethernet frames or only those with an IEEE
802.1Q VLAN tag.
<VID> =
Specifies the VLAN number between 1 and 4094
sysname(config)# interface port-channel 1-5
sysname(config-interface)# pvid 200
<all|tagged> =
Specifies all Ethernet frames (tagged and untagged) or only tagged
Ethernet frames.