ZyXEL Communications VES-1616F-44, User Manual

Page: 253 / 296

VES-1616F/1624F-44 User’s Guide
252 Chapter 33 Command Examples
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the BPDU control to
tunnel
, to forward BPDUs received on ports one, three, four
and five.
33.10.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set the number of broadband packets the interface receives per second.
peer|tunnel|discard|network>
= Type
peer
to process any BPDUs received on
these ports.
Type
tunnel
to forward BPDUs received on
these ports.
Type
discard
to drop any BPDUs received on
these ports.
Type
network
to process and forward BPDUs
with a VLAN tag and to process untagged
BPDUs.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#
Enables broadcast storm control limit on the switch.
<pkt/s>
Sets how many broadcast packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21