ZyXEL Communications VES-1616F-44, User Manual

Page: 189 / 296

VES-1616F/1624F-44 User’s Guide
188 Chapter 27 Maintenance
27.4.1.1 Checking Firmware Version Via the Console Port
You can check which firmware version the device uses during system startup through the
console port. The following figure shows an example in which the device is set to use the
second firmware.
27.5 Restore a Configuration File
Restore a previously saved configuration from your computer to the switch using the Restore
Configuration screen.
Figure 100 Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text
box or click Browse to display the Choose File screen (below) from which you can locate it.
After you have specified the file, click Restore . "config" is the name of the configuration file
on the switch, so your backup configuration file is automatically renamed when you restore
using this screen.
27.6 Backing Up a Configuration File
Backing up your switch configurations allows you to create various “snap shots” of your
device from which you may restore at a later date.
Back up your current switch configuration to a computer using the Backup Configuration
screen.
Bootbase Version: V1.00 | 08/04/2005 16:35:11
RAM:Size = 32 Mbytes
FLASH: Intel 32M
ZyNOS Version: V3.50(ABI.3)D0 | 02/08/2006
Press any key to enter debug mode within 3 seconds.
............................................................
Load_Image...ras-0