ZyXEL Communications VES-1616F-44, User Manual

Page: 126 / 296

VES-1616F/1624F-44 User’s Guide
Chapter 17 Access Control 125
The following table describes the labels in this screen.
17.4 Setting Up Login Accounts
Up to five people (one administrator and four non-administrators) may access the switch via
web configurator at any one time.
• An administrator is someone who can both view and configure switch changes. The
username for the Administrator is always admin . The default administrator password is
1234 .
Note: It is highly recommended that you change the default administrator password
(
1234 ).
• A non-administrator (username is something other than admin ) is someone who can
view but not configure switch settings.
Click Access Control from the navigation panel and then click Logins from this screen.
Table 48 Access Control: SNMP: Trap Group
LABEL DESCRIPTION
Trap
Destination IP
Select one of your configured trap destination IP addresses. These are the IP
addresses of the SNMP stations. You must first configure a trap destination IP
address in the SNMP Setting screen.
Use the rest of the screen to select which traps the switch sends to that station.
Type Select the categories of SNMP traps that the switch is to send to the SNMP station.
Options Select the individual SNMP traps that the switch is to send to the SNMP station. See
Section 17.3.2 on page 121 for individual trap descriptions.
The traps are grouped by category. Selecting a category automatically selects all of
the category’s traps. Clear the check boxes for individual traps that you do not want
the switch to send to the SNMP station. Clearing a category’s check box automatically
clears all of the category’s trap check boxes (the switch only sends traps from
selected categories).
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.