ZyXEL Communications V500-T1, User Manual

Page: 75 / 294

Chapter 5 The Phonebook
V500 Series User’s Guide
75
Figure 21 LCD Search by Number Example 2
3
Highlight the entry you want to call using the navigator, and press Select to begin the
call.
5.5.2 Search by Name
Take the following steps to search the phonebook by name.
1 Press the PHONEBOOK key. The Contact List screen appears.
2
Either scroll up and down using the navigator to select an entry, or use the alphanumeric
keypad to enter the first letter of a contact’s name. For example, press the
2 key three
times to enter a “C”. The cursor jumps to the first entry starting with that letter (if no
entry starting with that letter exists, nothing happens).
"
The numbers that display to the left of a contact’s name in this screen are
index numbers only - you cannot use them to select an entry to call.
5.6 Calling a Number Not in the Phonebook
When you want to call a number that is not in your V500’s phonebook, activate a line, dial the
number as usual and simply ignore the phonebook entries that appear. Press the
SEND key to
start the call.
23:58 2007-04-20
Line 1 To: My_SIP_1
94
1 945678 Dawn Unused
Unused
Unused
Select