manualshive.com logo in svg

ZyXEL Communications USG110, User Manual

Share
Download
ZyXEL Communications USG110 User Manual Download Page 993

 Chapter 46 File Manager

ZyWALL USG Series User’s Guide

993

If the upload was not successful, the following message appears in the status bar at the bottom of the 
screen.

Figure 706   

Firmware Upload Error

46.3.4  Firmware Upgrade via USB Stick

In addition to uploading firmware via the web configurator or console port (see the CLI Reference 
Guide), you can also upload firmware directly from a USB stick connected to the Zyxel Device.

1

Create a folder on the USB stick called ‘/[ProductName_dir]/firmware’. For example, if your Zyxel Device 
is USG110, then create a ‘/usg110_dir/firmware/’ folder on the stick.

2

Put one firmware ‘bin’ file into the firmware folder. Make sure the firmware ID and version number are 
correct for your model (the firmware ID is in brackets after the firmware version number - for USG100 it is 
AAPH). 

Note: Do not put more than one firmware ‘bin’ file into the firmware folder.

The firmware version in the USB stick must be different to the currently running firmware. 

If the firmware on the USB stick is older, then the Zyxel Device will ‘upgrade’ to the older 

version. It is recommended that the firmware on the USB stick be the latest firmware 

version.

3

Insert the USB stick into the Zyxel Device. The firmware uploads to the standby system space.

4

The 

SYS

 LED blinks when the Zyxel Device automatically reboots making the upgraded firmware in 

standby become the running firmware.

Note: If the 

startup-config.conf 

configuration file has problems and you are upgrading to 4.25 

or later firmware, then the Zyxel Device will revert (failover) to the previously running 

firmware. 

If the 

startup-config.conf 

configuration file has problems and you are upgrading to 

earlier than 4.25 firmware, then the Zyxel Device uses the new earlier firmware, but 

generates a log and tries the existing 

lastgood.conf 

configuration file. If there isn’t a 

lastgood.conf 

configuration file or it also has an error, the Zyxel Device applies the 

system-default.conf

 configuration file.

46.4  The Shell Script Screen 

Use shell script files to have the Zyxel Device execute commands that you specify. Use a text editor to 
create the shell script files. They must use a “.zysh” filename extension. 

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands