ZyXEL Communications USG-300 - V2.20 ED 2, Manual

Page: 239 / 1149

ZyWALL USG 300 User’s Guide
239
C
H A P T E R
1 0
Monitor
10.1 Overview
Use the Monitor screens to check status and statistics information.
10.1.1 What You Can Do in this Chapter
Use the Monitor screens for the following.
• Use the System Status > Port Statistics screen (see Section 10.2.1 on page
242 ) to look at packet statistics for each physical port.
• Use the System Status > Port Statistics Graph screen (see Section 10.2.1
on page 242 ) to look at a line graph of packet statistics for each physical port.
• Use the System Status > Interface Status screen ( Section 10.3 on page
243 ) to see all of the ZyWALL’s interfaces and their packet statistics.
• Use the System Status > Traffic Statistics screen (see Section 10.4 on page
247 ) to start or stop data collection and view statistics.
• Use the System Status > Session Monitor screen (see Section 10.5 on page
250 ) to view sessions by user or service.
• Use the System Status > DDNS Status screen (see Section 10.6 on page
252 ) to view the status of the ZyWALL’s DDNS domain names.
• The System Status > IP/MAC Binding screen ( Section 10.7 on page 253 )
lists the devices that have received an IP address from ZyWALL interfaces with
IP/MAC binding enabled.
• Use the System Status > Login Users screen ( Section 10.8 on page 254 ) to
look at a list of the users currently logged into the ZyWALL.
• Use the System Status > WLAN Status screen ( Section 10.9 on page 255 ) to
view the connection status of the wireless clients connected to (or trying to
connect to) a IEEE 802.11b/g card installed in the ZyWALL.
• Use the System Status > Cellular Status screen ( Section 10.11 on page 258 )
to check your 3G connection status.
• Use the System Status > USB Storage screen ( Section 10.11 on page 258 ) to
view information about a connected USB storage device.
• Use the AppPatrol Statistics screen (see Section 10.12 on page 259 ) to see a
bandwidth usage graph and statistics for each protocol.