ZyXEL Communications Unified Security Gateway ZyWALL 300, User Manual

Page: 761 / 1156

Chapter 44 AAA Server
ZyWALL USG 300 User’s Guide
761
• See Section 7.8 on page 155 for an example of how to use a RADIUS server to
authenticate user accounts based on groups.
44.2 Active Directory or LDAP Server Summary
Use the
Active Directory
or
LDAP
screen to manage the list of AD or LDAP
servers the ZyWALL can use in authenticating users.
Click
Configuration > Object > AAA Server > Active Directory
(or
LDAP
) to
display the
Active Directory
(or
LDAP
) screen.
Figure 509 Configuration > Object > AAA Server > Active Directory (or LDAP)
The following table describes the labels in this screen.
44.2.1 Adding an Active Directory or LDAP Server
Click Object > AAA Server > Active Directory (or LDAP ) to display the Active
Directory (or LDAP ) screen. Click the Add icon or an Edit icon to display the
Table 214 Configuration > Object > AAA Server > Active Directory (or LDAP)
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click
Edit
to open a screen where
you can modify the entry’s settings.
Remove To remove an entry, select it and click Remove . The ZyWALL confirms
you want to remove it before doing so.
Object
References
Select an entry and click
Object Reference
s to open a screen that
shows which settings use the entry. See Section 13.3.2 on page 309 for
an example.
# This field displays the index number.
Server
Address
This is the address of the AD or LDAP server.
Base DN This specifies a directory. For example,
o=ZyXEL, c=US
.