manualshive.com logo in svg

ZyXEL Communications UAG4100, User Manual

Share
Download
ZyXEL Communications UAG4100 User Manual Download Page 97

 Chapter 7 Monitor

UAG4100 User’s Guide

97

The following table describes the labels in this screen.  

7.16  The VPN 1-1 Mapping Status Screen

This screen displays the status of the active users to which the UAG applied a VPN 1-1 mapping 
rule.

Click 

Monitor > VPN 1-1 Mapping

 to open the following screen. 

Figure 64   

Monitor > VPN 1-1 Mapping 

Table 38   

Monitor > Printer Status

LABEL

DESCRIPTION

Add to Mgnt 
Printer List

Click this to add the selected printer to the managed printer list.

Discover Printer

Click this to detect the printer(s) that is connected to the UAG and display the printer 
information in the list below.

Refresh

Click this button to update the information in the screen.

#

This is the index number of the printer in the list.

Registration

This field displays whether the printer is added to the managed printer list (

Mgnt Printer

) 

or not (

Un-Mgnt Printer

).

IPv4 Address

This field displays the IP address of the printer that you configured in the 

Configuration > 

Printer Manager

 screen.

Update Time

This field displays the date and time the UAG last synchronized with the printer.

This shows 

n/a

 when the printer is not in the managed printer list or the printer status is 

sync fail

.

Status

This field displays whether the UAG can connect to the printer and update the printer 
information.

This shows 

n/a

 when the printer is not in the managed printer list.

Description

This field displays the descriptive name of the printer that you configured in the 

Configuration > Printer Manager

 screen.

Firmware 
Version

This field displays the model number and firmware version of the printer.

This shows 

n/a

 when the printer is not in the managed printer list or the printer status is 

sync fail

.

MAC

This field displays the MAC address of the printer.

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands