manualshive.com logo in svg

ZyXEL Communications UAG4100, User Manual

Share
Download
ZyXEL Communications UAG4100 User Manual Download Page 274

Chapter 27 Printer Manager

UAG4100 User’s Guide

274

Figure 188   

Monthly Account Example

27.3.5  Account Report Notes

The daily, monthly or last month account report holds up to 2000 entries. If there are more than 
2000 accounts created in the same month or same day, the account report’s calculations only 
include the latest 2000.

For example, if 2030 accounts (each priced at $1) have been created from 2013/05/01 00:00:00 to 
2013/05/31 19:59:59, the monthly account report includes the latest 2000 accounts, so the total 
would be $2,000 instead of $2,030.

Use the 

Monitor > System Status > Dynamic Guest 

screen to see the accounts generated on 

another day or month (up to 2000 entries total).

27.3.6  System Status 

This report shows the current system information such as the host name and WAN IP address. 

Key combination: A B C C A

The following figure shows an example. 

Monthly Account

----------------------------

2013/05

Username  Price

----------------------------

p2m6pf52 1.00

s4pcms28 2.00

7ufm7z22 2.00

qm5fxn95 6.00

----------------------------

TOTAL ACCOUNTS: 4

TOTAL PRICE: $ 11.00

----------------------------

2013/05/17  20:00:11

---End---

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands