manualshive.com logo in svg

ZyXEL Communications UAG4100, User Manual

Share
Download
ZyXEL Communications UAG4100 User Manual Download Page 103

 Chapter 7 Monitor

UAG4100 User’s Guide

103

7.17.2  Dynamic Users Log

Use this screen to view the UAG’s dynamic guest account log messages. Click 

Monitor > Log > 

Dynamic Users Log

 to access this screen.

Figure 68   

Monitor > Log > Dynamic Users Log 

The following table describes the labels in this screen.  

Priority

This indicates the selected log message’s priority.

Category

This indicates the selected log message’s category.

Message

This displays content of the selected log message.

Source

This displays the source IP address of the selected log message.

Destination

This displays the source IP address of the selected log message.

Note

This displays any notes associated with the selected log message.

Table 42   

Monitor > Log > View AP Log (continued)

LABEL

DESCRIPTION

Table 43   

Monitor > Log > Dynamic Users Log

LABEL

DESCRIPTION

Begin/End Date

Select the first and last dates to specify a time period. The UAG displays log messages only 
for the accounts created during the specified time period after you click 

Search

.

Begin/End Time

Select the begin time of the first date and the end time of the last date to specify a time 
period. The UAG displays log messages only for the accounts created during the specified 
time period after you click 

Search

.

Search

Click this button to update the information on the screen using the filter criteria in the date 
and time fields.

Refresh

Click this button to update the information in the screen.

Clear Log

Click this button to delete the log messages for invalid accounts.

#

This is the index number of the dynamic guest account in the list.

Status

This field displays whether an account expires or not. 

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands