Chapter 41 Schedules
UAG Series User’s Guide
455
41.2.1 The One-Time Schedule Add/Edit Screen
The
One-Time Schedule Add/Edit
screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the
Schedule
screen (see
click either the
Add
icon or an
Edit
icon in the
One Time
section.
Figure 307
Configuration > Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 213
Configuration > Object > Schedule > Edit (One Time)
LABEL
DESCRIPTION
Configuration
Name
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Date Time
StartDate
Specify the year, month, and day when the schedule begins.
•
Year
- 1900 - 2999
•
Month
- 1 - 12
•
Day
- 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StartTime
Specify the hour and minute when the schedule begins.
•
Hour
- 0 - 23
•
Minute
- 0 - 59
StopDate
Specify the year, month, and day when the schedule ends.
•
Year
- 1900 - 2999
•
Month
- 1 - 12
•
Day
- 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
StopTime
Specify the hour and minute when the schedule ends.
•
Hour
- 0 - 23
•
Minute
- 0 - 59
OK
Click
OK
to
save your changes back to the UAG.
Cancel
Click
Cancel
to exit this screen without saving your changes.
