manualshive.com logo in svg

ZyXEL Communications UAG2100, User Manual

Share
Download
ZyXEL Communications UAG2100 User Manual Download Page 371

 Chapter 31 Bandwidth Management

UAG Series User’s Guide

371

Figure 255   

 Configuration > BWM 

The following table describes the labels in this screen. See 

Section 31.2.1 on page 372

 for more 

information as well.  

Table 165   

 Configuration > BWM

LABEL

DESCRIPTION

Enable BWM

Select this check box to activate management bandwidth. 

Enable Highest 
Bandwidth 
Priority for SIP 
Traffic

Select this to maximize the throughput of SIP traffic to improve SIP-based VoIP call sound 
quality. This has the UAG immediately send SIP traffic upon identifying it. When this option 
is enabled the UAG ignores any other application patrol rules for SIP traffic (so there is no 
bandwidth control for SIP traffic) and does not record SIP traffic bandwidth usage 
statistics.

Add

Click this to create a new entry. Select an entry and click 

Add

 to create a new entry after 

the selected entry.

Edit

Select an entry and click this to be able to modify it. 

Remove

Select an entry and click this to delete it.

Activate

To turn on an entry, select it and click 

Activate

.

Inactivate

To turn off an entry, select it and click 

Inactivate

.

Move

To change an entry’s position in the numbered list, select it and click 

Move

 to display a 

field to type a number for where you want to put that entry and press [ENTER] to move the 
entry to the number that you typed.

Status

The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is 
inactive. The status icon is not available for the default  bandwidth management policy.

Priority

This is the position of your bandwidth management policy in the list. The ordering of your 
rules is important as rules are applied in sequence.

This field displays 

default

 for the default bandwidth management policy that the UAG 

performs on traffic that does not match any other bandwidth management policy.

Description

This is the descriptive name of the policy.

BWM Type

This is the bandwidth management type of the policy.

User

This is the user name or user group to which the policy applies. If 

any

 displays, the policy 

applies to all users.

Schedule

This is the schedule that defines when the policy applies. 

none

 means the policy always 

applies.

Summary of Contents for UAG2100










































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands