Chapter 7 Monitor
UAG Series User’s Guide
112
7.14 The Radio List Screen
Use this screen to view statistics about the wireless radio transmitters in each of the APs connected
to the UAG. To access this screen, click
Monitor > Wireless > AP Information > Radio List
.
Figure 78
Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Status
This displays whether or not the VLAN is activated.
VID
This shows the VLAN ID number.
Member
This field displays the Ethernet port(s) that is a member of this VLAN.
Station Count
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
Last Update
This field displays the date and time the information in the window was last updated.
Table 37
Monitor > Wireless > AP Information > AP List > Station Count of AP (continued)
LABEL
DESCRIPTION
Table 38
Monitor > Wireless > AP Information > Radio List
LABEL
DESCRIPTION
More
Information
Click this to view additional information about the selected radio’s SSID(s), wireless traffic
and wireless clients. Information spans a 24 hour period.
#
This is the radio’s index number in this list.
Loading
This indicates the AP’s load balance status (
UnderLoad
or
OverLoad
) when load
balancing is enabled on the AP. Otherwise, it shows
-
when load balancing is disabled or
the radio is in monitor mode.
AP Description
This displays the description of the AP to which the radio belongs.
Model
This displays the model of the AP to which the radio belongs.
MAC Address
This displays the MAC address of the radio.
Radio
This indicates the radio number on the AP to which it belongs.
OP Mode
This indicates the radio’s operating mode, such as
AP
(access point).
Profile
This indicates the profile name to which the radio belongs.
