manualshive.com logo in svg

ZyXEL Communications UAG2100, User Manual

Share
Download
ZyXEL Communications UAG2100 User Manual Download Page 107

 Chapter 7 Monitor

UAG Series User’s Guide

107

7.12  The Ethernet Neighbor Screen

The 

Ethernet Neighbor

 screen allows you to view the UAG’s neighboring devices in one place. 

It uses Smart Connect, that is Link Layer Discovery Protocol (LLDP) for discovering and configuring 
LLDP-aware devices in the same broadcast domain as the UAG that you’re logged into using the 
web configurator.

LLDP is a layer-2 protocol that allows a network device to advertise its identity and capabilities on 
the local network. It also allows the device to maintain and store information from adjacent devices 
which are directly connected to the network device. This helps you discover network changes and 
perform necessary network reconfiguration and management.

Note: Enable Smart Connect in the 

System > ZON

 screen.

See also 

System > ZON

 for more information on the ZyXEL One Network (ZON) utility that uses 

the ZyXEL Discovery Protocol (ZDP) for discovering and configuring ZDP-aware ZyXEL devices in 
the same network as the computer on which the ZON utility is installed.

Click 

Monitor

 > 

System Status

 > 

Ethernet Neighbor

 to see the following screen.

Status

Ready

 - you can have the UAG use the USB storage device. 

Click 

Remove Now

 to stop the UAG from using the USB storage device so you can 

remove it. 

Unused

 - the connected USB storage device was manually unmounted by using the 

Remove Now

 button or for some reason the UAG cannot mount it. 

Click 

Use It

 to have the UAG mount a connected USB storage device. This button is 

grayed out if the file system is not supported (unknown) by the UAG.

none

 - no USB storage device is connected.

Detail

This field displays any other information the UAG retrieves from the USB storage 
device. 

Deactivated

 - the use of a USB storage device is disabled (turned off) on the UAG.

OutofSpace

 - the available disk space is less than the disk space full threshold (see 

Section 46.2 on page 487

 for how to configure this threshold).

Mounting

 - the UAG is mounting the USB storage device. 

Removing

 - the UAG is unmounting the USB storage device. 

none

 - the USB device is operating normally or not connected.

Table 33   

Monitor > System Status > USB Storage (continued)

LABEL

DESCRIPTION

Summary of Contents for UAG2100










































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands