ZyXEL Communications UAG Series, Reference Manual

Page: 91 / 361

Chapter 13 Interfaces
UAG CLI Reference Guide
91
[no] host ip
Specifies the static IP address the UAG should assign. Use this
command, along with
hardware-address
, to create a static DHCP
entry.
Note: The IP address must be in the same subnet as the interface to
which you plan to bind the DHCP pool.
When this command is used, the UAG treats this DHCP pool like a
static entry, regardless of the
network
setting. The
no
command
clears this field.
[no] hardware-address mac_address
Reserves the DHCP pool for the specified MAC address. Use this
command, along with
host
, to create a static DHCP entry. The
no
command clears this field.
[no] client-identifier mac_address
Specifies the MAC address that appears in the DHCP client list. The
no
command clears this field.
[no] client-name host_name
Specifies the host name that appears in the DHCP client list. The
no
command clears this field.
host_name
: You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Use the following commands to create a pool of IP addresses. These
commands have no effect if you use the
host
command. You can still
set them, however.
dhcp-option <1..254> option_name
{boolean <0..1>| uint8 <0..255> |
uint16 <0..65535>
| uint32 <0..4294967295> | ip ipv4 [
ipv4 [ ipv4 ]] | fqdn fqdn [ fqdn [
fqdn ]] | text text | hex hex | vivc
enterprise_id hex_s [ enterprise_id
hex_s ] | vivs enterprise_id hex_s
[ enterprise_id hex_s ]
Adds or edits a DHCP extended option for the specified DHCP pool.
text
: String of up to 250 characters
hex
: String of up to 250 hexadecimal pairs.
vivc
: Vendor-Identifying Vendor Class option. A DHCP client may use
this option to unambiguously identify the vendor that manufactured
the hardware on which the client is running, the software in use, or
an industry consortium to which the vendor belongs.
enterprise_id
: Number <0..4294967295>.
hex_s
: String of up to 120 hexadecimal pairs.
vivs
: Vendor-Identifying Vendor-Specific option. DHCP clients and
servers may use this option to exchange vendor-specific information.
no dhcp-option <1..254>
Removes the DHCP extended option for the specified DHCP pool.
network IP/<1..32>
network ip mask
no network
Specifies the IP address and subnet mask of the specified DHCP pool.
The subnet mask can be written in w.x.y.z format or in /<1..32>
format.
Note: The DHCP pool must have the same subnet as the interface to
which you plan to bind it.
The
no
command clears these fields.
[no] default-router ip
Specifies the default gateway DHCP clients should use. The
no
command clears this field.
[no] description description
Specifies a description for the DHCP pool for identification. The
no
command removes the description.
[no] domain-name domain_name
Specifies the domain name assigned to DHCP clients. The
no
command clears this field.
Table 39
interface Commands: DHCP Settings (continued)
COMMAND DESCRIPTION