manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 67

 Chapter 7 Wireless LAN Profiles

UAG CLI Reference Guide

67

7.4.1  SSID Profile Example

The following example creates an SSID profile with the name ‘ZyXEL’. It makes the assumption that 
both the security profile (SECURITY01) and the MAC filter profile (MACFILTER01) already exist. 

[no] block-intra

Enables intra-BSSID traffic blocking. Use the 

no

 parameter to 

disable it in this profile.

By default this is disabled.

downlink-rate-limit 

data_rate

Sets the maximum incoming transmission data rate (either in 
mbps or kbps) on a per-station basis.

[no] hide

Prevents the SSID from being publicly broadcast. Use the 

no

 

parameter to re-enable public broadcast of the SSID in this 
profile.

By default this is disabled.

[no] macfilter 

macfilterprofile

Assigns the specified MAC filtering profile to this SSID profile. Use 
the 

no

 parameter to remove it.

By default, no MAC filter is assigned.

qos 

wlan_qos

Sets the type of QoS used by this SSID.

security 

securityprofile

Assigns the specified security profile to this SSID profile.

ssid

Sets the SSID. This is the name visible on the network to wireless 
clients. Enter up to 32 characters, spaces and underscores are 
allowed.

The default SSID is ‘ZyXEL’.

uplink-rate-limit 

data_rate

Sets the maximum outgoing transmission data rate (either in 
mbps or kbps) on a per-station basis.

vlan-id  <1..4094>

Applies to each SSID profile that uses 

localbridge

. If the VLAN 

ID is equal to the AP’s native VLAN ID then traffic originating from 
the SSID is not tagged.

The default VLAN ID is 1.

[no] vlan-support

Sets the UAG to tag traffic from the local Virtual AP (VAP) with the 
VLAN ID specified in this SSID profile.

The 

no

 command sets the UAG to not tag traffic from the local 

Virtual AP (VAP) with the VLAN ID.

exit

Exits configuration mode for this profile.

Table 19   

Command Summary: SSID Profile (continued)

COMMAND

DESCRIPTION

Router(config)# wlan-ssid-profile SSID01

Router(config-ssid-radio)# ssid ZyXEL

Router(config-ssid-radio)# qos wmm

Router(config-ssid-radio)# data-forward localbridge

Router(config-ssid-radio)# security SECURITY01

Router(config-ssid-radio)# macfilter MACFILTER01

Router(config-ssid-radio)# exit

Router(config)# 

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands