manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 59

UAG CLI Reference Guide

59

C

H A P T E R

      7

Wireless LAN Profiles

This chapter shows you how to configure wireless LAN  profiles on your UAG.

7.1  Wireless LAN Profiles Overview

The managed Access Points designed to work explicitly with your UAG do not have on-board 
configuration files, you must create “profiles” to manage them. Profiles are preset configurations 
that are uploaded to the APs and which manage them. They include: Radio and Monitor profiles, 
SSID profiles, Security profiles, and MAC Filter profiles. Altogether, these profiles give you absolute 
control over your wireless network.

7.2  AP Radio Profile Commands

The radio profile commands allow you to set up configurations for the radios onboard your various 
APs. 

The following table identifies the values required for many of these commands. Other input values 
are discussed with the corresponding commands.

Table 14   

Input Values for General Radio Profile Commands

LABEL

DESCRIPTION

radio_profile_name

The radio profile name. You may use 1-31 alphanumeric characters, 
underscores (

_

), or dashes (-), but the first character cannot be a number. This 

value is case-sensitive.

wlan_role

Sets the wireless LAN radio operating mode. At the time of writing, you can use 

ap

 for Access Point.

wireless_channel_2g

Sets the 2 GHz channel used by this radio profile. The channel range is 

1 - 14

. 

Note:  Your choice of channel may be restricted by regional regulations.

wireless_channel_5g

Sets the 5 GHz channel used by this radio profile. The channel range is 

36 - 

165

. 

Note:  Your choice of channel may be restricted by regional regulations.

wlan_hctw

Sets the HT channel width. Select either 

auto

 or 

20m

.

wlan_htgi

Sets the HT guard interval. Select either 

long

 or 

short

.

wlan_2g_basic_speed 

Sets the basic band rate for 2.4 GHz. The available band rates are 

1.0

, 

2.0

, 

5.5

, 

11.0

, 

6.0

, 

9.0

, 

12.0

, 

18.0

, 

24.0

, 

36.0

, 

48.0

, 

54.0

. 

wlan_2g_support_speed

Sets the support rate for the 2.4 GHz band. The available band rates are: 

1.0

,

 

2.0

, 

5.5

, 

11.0

, 

6.0

, 

9.0

, 

12.0

, 

18.0

, 

24.0

, 

36.0

, 

48.0

, 

54.0

. 

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands