manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 50

Chapter 5 Registration

UAG CLI Reference Guide

50

5.3.1  Command Examples

The following commands allow you to register your device with an existing account or create a new 
account and register the device at one time, and activate a trial service subscription.

The following command displays the account information and whether the device is registered.

The following command displays the service registration status and type and how many days 
remain before the service expires.

5.4  Registration Status Commands (V4.00 and Later Only)

The following table describes the commands available for registration status. You must use the 

configure terminal

 command to enter the configuration mode before you can use these 

commands.

 

Router# configure terminal

Router(config)# device-register username alexctsui password 123456

Router(config)# service-register service-type trial service content-filter

Router# configure terminal

Router(config)# show device-register status

username               : example

password               : 123456

device register status : yes

expiration self check  : no

Router# configure terminal

Router(config)# show service-register status all

Service              Status       Type     Count    Expiration

===========================================================================

Content-Filter       Licensed     Trial    N/A      16

Table 10   

Command Summary: Registration

COMMAND

DESCRIPTION

show service-register status all 

Displays all service license information.

show service-register status extension-user

Displays extension-user service license information.

It also displays the maximum number of wired and wireless users 
that may connect to the UAG at the same time.

show service-register status external-ap-

control

Displays external-ap-control service license information.

It also displays how many managed APs the UAG can support with 
your current license.

show service-register status sms

Displays whether the SMS ticketing service is activated.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands