ZyXEL Communications UAG Series, Reference Manual

Page: 164 / 361

Chapter 29 Web Authentication
UAG CLI Reference Guide
164
29.2.6 web-auth user-agreement Sub-commands
The following table describes the sub-commands for several web-auth user-agreement commands.
Note that not all rule commands use all the sub-commands listed here.
[no] web-portal session-url url
Sets the session page’s URL; for example, http://IIS server IP Address/
session.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The
no
command removes the URL.
The Internet Information Server (IIS) is the web server on which the web
portal files are installed.
[no] web-portal welcome-url url
Sets the welcome page’s URL; for example, http://IIS server IP Address/
welcome.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The
no
command removes the URL.
The Internet Information Server (IIS) is the web server on which the web
portal files are installed.
Table 97
web-auth type profile Sub-commands (continued)
COMMAND DESCRIPTION
Table 98
web-auth user-agreement Sub-commands
COMMAND DESCRIPTION
[no] agreement-url url
Sets the user agreement page’s URL; for example, http://IIS server IP
Address/logout.html. You can use up to 255 characters (0-9a-zA-Z;/
?:@&=+$\.-_!~*'()%) in quotes.
The
no
command removes the URL.
The Internet Information Server (IIS) is the web server on which the user
agreement files are installed.
[no] idle-detection [timeout
<1..60>]
Sets the UAG to monitor how long each access user is logged in and idle (in
other words, there is no traffic for this access user). The UAG automatically
logs out the access user once the specified idle timeout has been reached.
[no] internal-page-customization
Sets the UAG to use the custom user agreement pages that are uploaded to
the UAG through the web configurator.
logon-re-auth-time <0..1440>
Sets the number of minutes the user can be logged into the UAG in one
session before having to log in again.
type {external | internal}
Sets the user agreement page appears whenever the web portal intercepts
network traffic, preventing unauthorized users from gaining access to the
network.
internal
: Use the default user agreement page built into the UAG.
external
: Use a custom user agreement page from an external web portal
instead of the default one built into the UAG. You can configure the look
and feel of the user agreement page.
[no] welcome-url < url >
Sets the welcome page’s URL; for example, http://IIS server IP Address/
logout.html. You can use up to 255 characters (0-9a-zA-Z;/?:@&=+$\.-
_!~*'()%) in quotes.
The
no
command removes the URL and sets the UAG to use the welcome
page of internal user agreement file.
The Internet Information Server (IIS) is the web server on which the user
agreement files are installed.