ZyXEL Communications STB-1001S2, User Manual, Page: 42 / 86

Appendix A Setting up Your Computer’s IP Address
STB-1001S2 User’s Guide
42
Figure 19 WIndows 95/98/Me: Network: Configuration
Installing Components
The Network window Configuration tab displays a list of installed components. You need a
network adapter, the TCP/IP protocol and Client for Microsoft Networks.
If you need the adapter:
1
In the Network window, click Add .
2 Select Adapter and then click Add .
3
Select the manufacturer and model of your network adapter and then click OK .
If you need TCP/IP:
1
In the Network window, click Add .
2 Select Protocol and then click Add .
3
Select Microsoft from the list of manufacturers .
4 Select TCP/IP from the list of network protocols and then click OK .
If you need Client for Microsoft Networks:
1 Click Add .
2
Select Client and then click Add .
3 Select Microsoft from the list of manufacturers.
4
Select Client for Microsoft Networks from the list of network clients and then click
OK .
5
Restart your computer so the changes you made take effect.