ZyXEL Communications STB-1001S, User Manual

Page: 32 / 137

Chapter 2 The Menu System
STB-1001S User’s Guide
32
2.3.2 The Advanced Setup: Information Menu
Use this menu to see information about the STB’s current network and configuration settings.
Select
Information from the column on the left of the screen. The following menu displays.
Figure 9 The Information Menu
The following table describes the labels in this menu.
2.3.3 The Advanced Setup: Network Menu
Use this menu to set up the STB’s IP address, media server information, and homepage.
This menu differs according to the
Mode you select.
Table 5 The Information Menu
LABEL DESCRIPTION
Date This shows the current date configured on the STB.
CPU This shows the Central Processing Unit’s product code.
Flash This shows the quantity of available flash (non-volatile) memory.
Memory This shows the quantity of available run-time memory.
MAC Address This shows the hardware Media Access Control address of the
STB.
IP Address This shows the IP address currently assigned to the STB. You can
change this in the Advanced Setup: Network menu.
STB Version This shows the firmware version running on the STB. Check this
before you upload new firmware.
Bootloader This shows the version number of the software that loads the
STB’s operating system on startup.
Kernel This shows the version number of the code that controls the STB’s
basic operations.
Rootfs This shows the version number of the STB’s filesystem code.
Apps This shows the version number of the STB’s software applications.