ZyXEL Communications SMG-700 User Manual Download Page 25

Page: 25 / 80

Chapter 2 The Menu System

STB-1001S2 User’s Guide

Figure 8

The Language Setup Menu

2.2.6 The Factory Default Menu

Use this screen to return the STB to its default settings.

Figure 9

The Factory Default Menu

Click

Factory Default

to return the STB to its original settings. Any configuration changes

you made will be lost.

2.3 The Advanced Setup Menus

The

Advanced Setup

menus allow you to see and change network settings.

NOT

use this section unless you have been specifically told to by the

service provider! Misconfiguration of the menus in this section could render
your STB unusable. If in doubt, contact the service provider.

2.3.1 Accessing and Exiting the Menus

Take the following steps to access the

Advanced Setup

menus.

Summary of Contents for SMG-700

















































































Search results

Summary of Contents for SMG-700

Reviews:

Related manuals for SMG-700

Brands by name

Popular brands

ZyXEL Communications SMG-700, User Manual

Search results

Summary of Contents for SMG-700

Reviews:

Related manuals for SMG-700

Brands by name

Popular brands