ZyXEL Communications SMG-700 User Manual Download

Page: 18 / 80

Chapter 1 Introducing the STB

STB-1001S2 User’s Guide

1.2 LEDs

This section describes the LEDs (lights) on the front of the STB.

Figure 2

LEDs

1.3 Rear Panel Connections

This section describes the rear of the STB.

Table 1

LEDs

LED

STATUS

DESCRIPTION

POWER

Blinking

The STB is starting up, or is in standby mode.

Green

The STB is on and ready to use.

Off

The STB is not receiving power, or has malfunctioned.

LAN

Green

The STB has an Ethernet connection to the network on
the

LAN

port.

Blinking

Green

The STB has an Ethernet connection to the network on
the

LAN

port, and is transmitting or receiving data.

Off

The STB has no network connection on the

LAN

port.

REMOTE

Blinking

Green

The Infra-red receiver on the front of the STB is
receiving signals from the remote control.

Off

The Infra-red receiver on the front of the STB is not
receiving signals from the remote control.

Summary of Contents for SMG-700

















































































Search results

Summary of Contents for SMG-700

Reviews:

Related manuals for SMG-700

Brands by name

Popular brands

ZyXEL Communications SMG-700, User Manual

Search results

Summary of Contents for SMG-700

Reviews:

Related manuals for SMG-700

Brands by name

Popular brands