Chapter 6 LAN
SBG5500 Series User’s Guide
96
6.5 The Additional Subnet Screen
Use the
Additional Subnet
screen to configure IP alias.
IP alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The SBG supports multiple logical LAN interfaces via its physical Ethernet interface with the
SBG itself as the gateway for the LAN network. When you use IP alias, you can also configure firewall
rules to control access to the LAN's logical network (subnet).
Click
Configuration > LAN / Home Network > Additional Subnet
to display the screen shown next.
Figure 66
Configuration > LAN / Home Network > Additional Subnet
The following table describes the labels in this screen.
6.6 The Wake on LAN Screen
Use this screen to turn on a device on the LAN network. To use this feature, the remote device must also
support Wake On LAN.
Table 26 Configuration > LAN / Home Network > Additional Subnet
LABEL
DESCRIPTION
General
Group Name
Select the interface group name for which you want to configure the IP alias settings. See
for how to create a new interface group. A newly created local network
(interface group) belongs to the LAN zone by default.
IP Alias Setup
Enable
Select the check box to configure a LAN network for the SBG.
IP Address
Enter the IP address of your SBG in dotted decimal notation.
Subnet Mask
Your SBG will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the SBG.
Apply
Click
Apply
to save your changes.
Reset
Click
Reset
to return the screen to its last-saved settings.
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
