Chapter 10 VPN
SBG5500 Series User’s Guide
163
10.5 The IPsec VPN Screen
Click
Configuration > VPN > IPsec VPN
to open the following screen.
Use
Gateway Configuration
to manage the SBG’s VPN gateway policies. A VPN gateway specifies the
IPsec routers at either end of a VPN tunnel and the IKE SA settings (phase 1 settings). You can also
activate and deactivate each VPN gateway.
Use
Connection Configuration
to specify which IPsec VPN gateway an IPsec VPN connection policy
uses, which devices behind the IPsec routers can use the VPN tunnel, and the IPsec SA settings (phase 2
settings). You can also activate or deactivate and connect or disconnect each VPN connection (each
IPsec SA).
Figure 132
Configuration > VPN > IPsec VPN
Assigned IP
This is the local point-to-point IP address assigned to the client.
Public IP
This is the client’s public IP address for this connection.
Table 68 Configuration > VPN > VPN Status
LABEL
DESCRIPTION
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
