Chapter 9 Firewall
SBG5500 Series User’s Guide
147
Figure 115
Trust Domain: Add/Edit
The following table describes the labels in this screen.
9.6 The Zone Control Screen
Use this screen to set the firewall’s default actions. Firewall rules are grouped based on the direction of
travel of packets to which they apply.
Click
Configuration > Firewall / Security > Zone Control
to display the following screen.
Figure 116
Configuration > Firewall > Security > Zone Control
Table 57 Trust Domain: Add/Edit
LABEL
DESCRIPTION
IP Address [/Prefix Length
(optional)]
Enter a public IPv4 IP address which is allowed to access the service on the SBG from
the WAN. You can also enter the prefix length of the IP address.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Summary of Contents for SBG5500-A
Page 12: ...12 PART I User s Guide...
Page 44: ...44 PART II Technical Reference...
