ZyXEL Communications SAM1316-22, User Manual

Page: 87 / 464

SAM1316-22 User’s Guide
87
C
H A P T E R
11
IP Setup
The IP Setup screen allows you to configure a device IP address, subnet mask
and DNS (domain name server) for management purposes.
To open this screen, click Basic Setting, IP Setup.
Figure 41 IP Setup
The following table describes the labels in this screen.
Table 16 IP Setup
LABEL DESCRIPTION
IP Enter the IP address of your SAM1316-22 in dotted decimal notation
for example 1.2.3.4.
IP Mask Enter the IP subnet mask of your SAM1316-22 in dotted decimal
notation for example 255.255.255.0.
Apply IP setting Click Apply IP setting to save your changes to the device’s IP
address and/or subnet mask to the SAM1316-22’s volatile memory.
The SAM1316-22 loses these changes if it is turned off or loses power,
so use the Config Save link on the navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring the fields again.
Default Gateway Enter the IP address of the default outgoing gateway in dotted
decimal notation.