ZyXEL Communications SAM1316-22, User Manual

Page: 392 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
392
The following example displays connection statistics for port 1.
59.2.2 DSL Port Lineinfo Command
Syntax:
ras> statistics shdsl lineinfo <portlist>
where
This command shows the line operating values of a DSL port. If a port is down, it
shows the connection status.
An example is shown next.
The following table explains these counters.
Figure 227 DSL Statistics Show Command Example
ras> statistics shdsl show 1
actual rate
port wire pair status (kbps) up time error second(15M/24H)
---- --------- ------ ----------- -------------- ---------------------
1 - - - - -/-
<portlist> =
You can specify a single DSL port <1>, all DSL ports
<*> or a list of DSL ports <1,3,5>. You can also include
a range of ports <1,5,6~8>.
Figure 228 DSL Port Lineinfo Command Example
ras> statistics shdsl lineinfo 1~4
[port 1]
link is down
[port 2]
link is down
[port 3]
link is down
[port 4]
link is down
Table 107 DSL Port Lineinfo Command Counters
LABEL DESCRIPTION
Link This displays the connection status of the DSL link.
Min Rate(kbps) This is the minimum rate (in Kbps) of the DSL line.
Max Rate(kbps) This is the maximum rate (in Kbps) of the DSL line.
Actual Rate(kbps) This is the rate (in Kbps) at which the port has been sending and
receiving data.