ZyXEL Communications SAM1316-22, User Manual

Page: 387 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
387
The following example displays the DSL DEFVAL profile.
See Section 59.1.5 on page 387 for a description of each attribute.
59.1.5 DSL Port Profile Set Command
Syntax:
shdsl profile set <profile> <min-rate> <max-rate>
[annexa|annexb 2wire|4wire|mpair4
[lp_off | lp_on_cur [curr-margin] | lp_on_wc [worst-margin]]]
where
Figure 221 DSL Port Profile Show Command Example
ras> shdsl profile show DEFVAL
01. DEFVAL
max rate (Kbps): 2304
min rate (Kbps): 192
annex mode : annexb
wire pair : 2wire
line probe : lp_off
curr margin (dB): 0
worst margin (dB): 0
<profile> =
The descriptive name for the profile.
<min-rate> =
The minimum transmission rate in Kbps.
(192~4096)
<max-rate> =
The maximum transmission rate in Kbps.
(192~4096)
annexa|annexb =
The region setting, annexb is the default.
annexa
= DSL over POTS (G.992.1 Annex A).
annexb
= DSL over ISDN (G.992.1 Annex B).
2wire|4wire|mpair4 =
The wire pair number.
2wire
= a normal connection using a single DSL
port’s two wires, this is the default.
4wire
= a 4-wire group (two DSL ports grouped
together).
mpair4
= an 8-wire group (four DSL ports grouped
together).