ZyXEL Communications SAM1316-22, User Manual

Page: 234 / 464

Chapter 35 Access Control
SAM1316-22 User’s Guide
234
35.5 Service Access Control Screen
To open this screen, click Advanced Application, Access Control, Service
Access Control.
Figure 113 Service Access Control
The following table describes the labels in this screen.
35.6 Remote Management Screen
Use this screen to configure the IP address ranges of trusted computers that may
manage the SAM1316-22.
Table 82 Service Access Control
LABEL DESCRIPTION
Up Click Up to go back to the previous screen.
Services Services you may use to access the SAM1316-22 are listed here.
Active Select the Active check boxes for the corresponding services that you
want to allow to access the SAM1316-22.
Server Port For Telnet, FTP or web services, you may change the default service
port by typing the new port number in the Server Port field. If you
change the default port number then you will have to let people (who
wish to use the service) know the new port number for that service.
Apply Click Apply to save your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.