ZyXEL Communications SAM1316-22, User Manual

Page: 154 / 464

Chapter 19 Static Multicast
SAM1316-22 User’s Guide
154
Previous
Next
Click one of these buttons to show the previous/next screen if all
status information cannot be seen in one screen.
Reload Click this button to refresh the screen.
The first table displays the names of the fields. The subsequent tables
show the settings of the IGMP groups.
Index This is the static multicast group index number.
MAC Address This is the multicast MAC address.
1~16 These fields display the static multicast group membership status of
the DSL ports.
“V” displays for members and “-“ displays for non-members.
Click a DSL port’s status to change it (clicking a “V” changes it to “-“
and vise versa).
Join All Click Join All to make all of the DSL ports members of the static
multicast group.
Leave All Click Leave All to remove all of the DSL ports from the static
multicast group.
Delete Click Delete to remove a static multicast group.
Adding new entry
Add
Type a multicast MAC address in the field, and click the Add button to
create a new static multicast entry. Multicast MAC addresses must be
01:00:5E:xx:xx:xx
, where
x
is a “don’t care” value. For example,
01:00:5E:10:10:10
is a valid multicast MAC address.
Clicking Add saves your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Table 43 Static Multicast (continued)
LABEL DESCRIPTION