ZyXEL Communications SAM1316-22, User Manual

Page: 103 / 464

Chapter 13 xDSL Port Setup
SAM1316-22 User’s Guide
103
13.10 PPVC Setup Screen
Use this screen to view and configure PPVCs.
To open this screen, click Basic Setting, xDSL Port Setup, PPVC Setup.
Figure 50 PPVC Setup
The following table describes the labels in this screen.
2 -> level 2
1 -> level 1
0 > level 0
Table 21 IEEE 802.1p Priority to PPVC Mapping (continued)
IEEE 802.1 PRIORITY MAPS TO: PPVC 0/33, PRIORITY QUEUE
Table 22 PPVC Setup
LABEL DESCRIPTION
xDSL Port Setup Click xDSL Port Setup to go to the screen where you can configure
DSL port settings (see
Section 13.6 on page 92 ).
VC Setup Click VC Setup to open the VC Setup screen where you can
configure VC settings for the DSL ports (see
Section 13.8 on page
98 ).
Port Use this drop-down list box to select a port for which you wish to
configure settings.
Encap. Select the encapsulation type (llc or vc) for this PPVC.
VPI Type the Virtual Path Identifier for this PPVC.
VCI Type the Virtual Circuit Identifier for this PPVC. The SAM1316-22 uses
this PVC channel internally. This PVC is not needed on the subscriber’s
device. This PVC cannot overlap with any existing PVCs on this port.