ZyXEL Communications RGS Series, User Manual

Page: 79 / 259

79
5.3.30 ACL – ACL Port
Configure the ACL parameters ( ACE ) of each switch port. These parameters will affect frames received on a port
unless the frame matches a specific ACE.
Object Description
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The allowed values are
0
through
255
. The
default value is 0.
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit".
Rate Limiter ID Select which rate limiter to apply on this port. The allowed values are
Disabled
or
the values
1
through
16
. The default value is "Disabled".
Port Redirect Select which port frames are redirected on. The allowed values are
Disabled
or a
specific port number and it can't be set when action is permitted. The default value is
"Disabled".
Mirror Specify the mirror operation of this port. The allowed values are:
Enabled
: Frames received on the port are mirrored.
Disabled
: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging Specify the logging operation of this port. Notice that the logging message doesn't
include the 4 bytes CRC. The allowed values are:
Enabled
: Frames received on the port are stored in the System Log.
Disabled
: Frames received on the port are not logged.
The default value is "Disabled". Note: The logging feature only works when the packet
length is less than 1518(without VLAN tags) and the System Log memory size and
logging rate is limited.
Shutdown Specify the port shut down operation of this port. The allowed values are:
Enabled
: If a frame is received on the port, the port will be disabled.